: Every digital (D0-D13) and analog (A0-A5) pin is expanded into a 3-pin row . G (Ground) : Connects to your sensor's GND.
The best part about the Sensor Shield V5.0 is that it changes about how you code. It is purely hardware connectivity. Since the shield is just a pass-through, your code interacts with the Arduino pins exactly as you would without the shield. arduino sensor shield v5 0 manual
void loop() // Sweep from 0 to 180 degrees for (pos = 0; pos <= 180; pos++) myservo.write(pos); delay(15); int distance = readUltrasonic(); Serial.print("Angle: "); Serial.print(pos); Serial.print(" cm: "); Serial.println(distance); : Every digital (D0-D13) and analog (A0-A5) pin
Includes dedicated footprints for both traditional LCD1602 parallel connections and LCD12864 serial graphics displays. Power Management and the SEL Jumper It is purely hardware connectivity
The Sensor Shield V5.0 (often labeled "Sensor Shield V5.0" or "Expansion Shield for Arduino Uno") is a passive expansion board. It sits directly on top of your Arduino Uno (or Leonardo/Mega 2560 with adapter considerations) via the standard stacking headers.