"One of the divine Jyotirlinga among Twelve Jyotirlingas in India"
| Parameter | Value | | :--- | :--- | | Continuous Power (at 25°C) | 4000W (resistive load) | | Peak Power (1 second) | 10,000W | | No-load current draw | <2.5A (12V model) / <1.2A (24V) | | Output waveform | Modified Sine Wave (THD <30%) or Pure Sine (THD <3%) | | Output frequency | 50Hz ± 0.5Hz / 60Hz ± 0.5Hz | | Efficiency (max) | 88% at full load | | Operating temperature | -10°C to +50°C (derate power above 40°C) | | Standby power (remote off) | <0.5W | | Protection categories | Over/Under voltage, Overheat, Short circuit, Reverse polarity (via external fuse) |
If you can tell me the or the DC input voltage (12, 24, or 48V) of your Power Jack inverter, I can provide more precise instructions for wiring and troubleshooting. Share public link
Connect the negative (-) DC cable to the negative terminal of the battery bank, then attach the other end to the negative terminal of the inverter.
Draws up to 416 Amps. Requires parallel runs of 4/0 AWG copper wire.
Secure the negative (-) cable to the negative terminal of the battery bank, then connect the other end to the negative (Black) terminal on the inverter.
110V/120V AC or 220V/240V AC split-phase (Model-specific)
| Parameter | Value | | :--- | :--- | | Continuous Power (at 25°C) | 4000W (resistive load) | | Peak Power (1 second) | 10,000W | | No-load current draw | <2.5A (12V model) / <1.2A (24V) | | Output waveform | Modified Sine Wave (THD <30%) or Pure Sine (THD <3%) | | Output frequency | 50Hz ± 0.5Hz / 60Hz ± 0.5Hz | | Efficiency (max) | 88% at full load | | Operating temperature | -10°C to +50°C (derate power above 40°C) | | Standby power (remote off) | <0.5W | | Protection categories | Over/Under voltage, Overheat, Short circuit, Reverse polarity (via external fuse) |
If you can tell me the or the DC input voltage (12, 24, or 48V) of your Power Jack inverter, I can provide more precise instructions for wiring and troubleshooting. Share public link power jack inverter 5000w manual
Connect the negative (-) DC cable to the negative terminal of the battery bank, then attach the other end to the negative terminal of the inverter. | Parameter | Value | | :--- |
Draws up to 416 Amps. Requires parallel runs of 4/0 AWG copper wire. Requires parallel runs of 4/0 AWG copper wire
Secure the negative (-) cable to the negative terminal of the battery bank, then connect the other end to the negative (Black) terminal on the inverter.
110V/120V AC or 220V/240V AC split-phase (Model-specific)
Copyrights 2020-21. Privacy Policy All Rights Reserved | Designed and Developed By AIGS Pvt Ltd
