To change parameters on the 3501, you typically require a (often the 1314 or 1311 model) or the Curtis PC Programming Station (software). The unit is Password Protected by default to prevent unauthorized changes, which is a key feature for OEMs wishing to lock their configurations.
Curtis 3501 Manual: Comprehensive Guide to Installation, Operation, and Programming curtis 3501 manual
IP65 front panel protection against dust and water ingress when mounted correctly. 2. Mounting and Physical Installation To change parameters on the 3501, you typically
Keep the front lens clean with a damp cloth (avoid harsh solvents). B-: Main negative supply connection to the battery bank
+---------------------------------------------+ | CURTIS 3501 TOP PANEL | | | | [ B+ ] [ B- ] [ M1 ] [ M2 ]| | Batt (+) Batt (-) Motor (1) Motor (2) | | | [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] | | [ 6 ] [ 7 ] [ 8 ] [ 9 ] [10] | | Logic Pins (Molex) | +---------------------------------------------+ High-Power Terminals Main positive supply connection from the battery bank. B-: Main negative supply connection to the battery bank. M1: Output terminal to the first leg of the motor armature.
: Configure the Battery Discharge Indicator for specific battery types (Lead-Acid/Lithium). 30 Metric/English : Toggle between measurement units. 40 Set Clock : Adjust the system time. Installation & Maintenance
Used for factory programming or handheld Curtis programmers (if applicable). Important Wiring Safety Guidelines