Xinje Plc Usb Driver Install Jun 2026

If using a serial emulation driver, select the exact number you found in Device Manager during Step 4.

Connect the USB cable from the PLC to an open USB port on your PC. Step 2: Open Device Manager

: Execute the setup file as an administrator. The USB driver installation is usually bundled with the main software installation. Manual Driver Installation (if needed) : xinje plc usb driver install

| Problem | Solution | | :--- | :--- | | Driver installation fails with “hash mismatch” | Disable (Core Isolation) temporarily in Windows Security. Restart, install driver, then re-enable. | | COM port disappears after reboot | Reinstall driver. Check your USB cable—some cheap cables are power-only, no data. | | Windows says “Third-party INF is not digitally signed” | On Windows 10/11, go to Settings > Update & Security > Recovery > Advanced Startup > Troubleshoot > Startup Settings > Restart > Press 7 (Disable driver signature enforcement) . Then reinstall. | | PLC software cannot open COM port | Make sure no other software (like a serial monitor) is using the same COM port. Change the COM port number in Device Manager > Port Settings > Advanced. |

Download the latest version of XDPPro . During the setup of XDPPro V3.5.1 , the installer will prompt you to install additional components like XNetSetup and SLabVirtualCOM , which are essential for USB communication. If using a serial emulation driver, select the

Right-click the setup.exe file and select . Follow the on-screen prompts to complete the installation.

If your Xinje PLC has an Ethernet port, use that. No USB driver headaches. The USB driver installation is usually bundled with

Modern Windows operating systems strictly enforce digital signatures. If the installation fails, restart your PC in "Disable Driver Signature Enforcement" mode, then attempt the manual installation again.