If none of these steps make your USB mass storage work, the NAND chip has physically failed. At that point, recycle the drive and buy a new one. But for 90% of users with a "dead" SSS6697-B7, the MPtool is the magic bullet you have been searching for.
First, confirm you are dealing with the correct hardware. sss6697 b7 usb mass storage work
If you are searching for content regarding how to get this controller to "work," it usually implies one of two scenarios: either the drive is not being recognized by the computer, or you are trying to restore it ("mass production") using the SSS MP Tool. If none of these steps make your USB
Cannot format the drive (e.g., "Windows was unable to complete the format"). 2. Preliminary Troubleshooting Steps First, confirm you are dealing with the correct hardware
This code specifically points to the USB 2.0 controller chip manufactured by that is embedded in a USB flash drive. Key details include:
Once the MPTool process passes, unplug the drive, wait five seconds, and insert it back into the computer. Navigate to ( diskmgmt.msc ). The device should now properly enumerate as a healthy, unallocated USB Mass Storage device. Format it using the file system of your choice (FAT32, exFAT, or NTFS) to bring your SSS6697 B7 drive back to full, reliable operation. To help you get your specific drive working, tell me: What error message do you see when plugging it in? What operating system are you using for the repair? What ChipGenius readout or Flash ID did you get?
: Open Device Manager , expand Universal Serial Bus controllers , right-click USB Mass Storage Device , and select Update driver .