Qidi Xplus Firmware Install -

Before starting any firmware update, complete these preparation steps:

: Use a drive smaller than 16GB (ideally 8GB or less). Ensure it is formatted to FAT32.

The mainboard will automatically detect the files, beep, and display a progress bar. Do not turn off the machine during this process. qidi xplus firmware install

Unlike Klipper machines, legacy Chitu boards require you to "print" the configuration files to apply them:

On the printer touchscreen, navigate to Settings -> About (or System Info ). Verify that the firmware version matches the version string of the file you downloaded. Do not turn off the machine during this process

Insert your USB drive into your PC. Right-click the drive, select Format , set the file system to FAT32 , and click format.

Turn on the printer. The Linux host system inside the X-Plus 3 will detect the file and initiate an automated flashing script. Insert your USB drive into your PC

I can provide specific recovery steps or Klipper configuration adjustments for your situation. Share public link